HORIZONTAL MODEL |
|
|
|
|
Sizes Available : 4”, 6”, 8”, 10” |
|
(Depending upon size of the external grinding wheel that can be mounted) |
|
Application : Can be used for external & internal grinding operations on lathe and other machines like Shaping Machine, Planning Machine & other special purpose machines. |
|
Both shaft and housing pipe made from alloy steel and are hardened and precision ground |
|
Assembly of high speed spindles consist of high precision Angular Contact Bearings packed with high temp. / high speed grease like the KLUBER ISO Flex NBU 15 or equivalent. |
INTERNAL GRINDING SPINDLE |
|
VERTICAL MODEL |
 |
Sizes Available : 4”, 6”, 8” |
(Internal Grinding Attachment cannot be provided for the Vertical Model). |
||
|
||
KEYWAY MILLING ATTACHMENT |
|
|
|
3/4" Drill Chuck provided as standard. 4” 3 jaw self centering chuck can be provided against request |
|
Application : Milling keyways on lathes, by mounting long shafts and other such work pieces between centers. |
|
Design : Chuck mounted on shaft supported by big taper roller bearings to give vibration free running. |
HORIZONTAL MODEL |
|
|
|
|
Sizes Available : 4”, 6”, 8”, 10” |
|
(Depending upon size of the external grinding wheel that can be mounted) |
|
Application : Can be used for external & internal grinding operations on lathe and other machines like Shaping Machine, Planning Machine & other special purpose machines. |
|
Both shaft and housing pipe made from alloy steel and are hardened and precision ground |
|
Assembly of high speed spindles consist of high precision Angular Contact Bearings packed with high temp. / high speed grease like the KLUBER ISO Flex NBU 15 or equivalent. |
INTERNAL GRINDING SPINDLE |
|
VERTICAL MODEL |
|
Sizes Available : 4”, 6”, 8” |
(Internal Grinding Attachment cannot be provided for the Vertical Model). |
||
|
||
KEYWAY MILLING ATTACHMENT |
|
|
|
3/4" Drill Chuck provided as standard. 4” 3 jaw self centering chuck can be provided against request |
|
Application : Milling keyways on lathes, by mounting long shafts and other such work pieces between centers. |
|
Design : Chuck mounted on shaft supported by big taper roller bearings to give vibration free running. |