MILLING REDUCTION SOCKET |
|
|
Made from 16MnCr5 (Eqvivalent to SAE 8620) and case hardened to 55-58 HRc |
|
Precision ground. Runout within 0.015mm |
| IN ISO TAPER | ||
|
|
Range |
| ISO - 30 : MT-1, MT-2, MT-3 | ||
| ISO - 40 : MT-1, MT-2, MT-3, MT-4 | ||
| ISO - 50 : MT-1, MT-2, MT-3, MT-4, MT-5 | ||
(Sockets of Type B suitable to hold Morse Taper Tools with tapped end also available). |
||
| IN MAS-BT TAPER | ||
|
|
Range |
| BT - 30 : MT-1, MT-2, MT-3 | ||
| BT - 40 : MT-1, MT-2, MT-3, MT-4 | ||
| BT - 50 : MT-1, MT-2, MT-3, MT-4, MT-5 | ||
| IN R-8 TAPER | ||
|
|
Range |
| R-8 : MT-1, MT-2, MT-3 | ||
Available in both metric (M12 x 1.5) & imperial (7/16" UNF) Tappings. |
||
| ISO TO ISO REDUCTION SOCKET | ||
|
|
Range |
| ISO-50 : ISO-40 | ||
| ISO-50 : ISO-30 | ||
| ISO-40 : ISO-30 | ||
MILLING REDUCTION SOCKET |
|
|
Made from 16MnCr5 (Eqvivalent to SAE 8620) and case hardened to 55-58 HRc |
|
Precision ground. Runout within 0.015mm |
| IN ISO TAPER | ||
|
|
Range |
| ISO - 30 : MT-1, MT-2, MT-3 | ||
| ISO - 40 : MT-1, MT-2, MT-3, MT-4 | ||
| ISO - 50 : MT-1, MT-2, MT-3, MT-4, MT-5 | ||
(Sockets of Type B suitable to hold Morse Taper Tools with tapped end also available). |
||
| IN MAS-BT TAPER | ||
|
|
Range |
| BT - 30 : MT-1, MT-2, MT-3 | ||
| BT - 40 : MT-1, MT-2, MT-3, MT-4 | ||
| BT - 50 : MT-1, MT-2, MT-3, MT-4, MT-5 | ||
| IN R-8 TAPER | ||
|
|
Range |
| R-8 : MT-1, MT-2, MT-3 | ||
Available in both metric (M12 x 1.5) & imperial (7/16" UNF) Tappings. |
||
| ISO TO ISO REDUCTION SOCKET | ||
|
|
Range |
| ISO-50 : ISO-40 | ||
| ISO-50 : ISO-30 | ||
| ISO-40 : ISO-30 | ||