LIVE CENTER

 MODEL

AVAILABLE IN TAPER SIZES

  EXTRA LIGHT DUTY MT-1, 2 & 3
  (Double Bearing) (Plain Point only)
  STANDARD MT-1, 2, 3, 4, 5 & 6
  (Heavy Duty Triple Bearing) (Plain, Carbide Tipped, Female, Extended, HSS Tipped Points)
  EXTRA HEAVY DUTY MT-3, 4, 5 & 6   
  (Four Bearings) (Plain, Carbide Tipped and Extended Points)
  SUPER EXTRA HEAVY DUTY MT-4, 5, 6 & 7
  (Four & Five Bearings) (Plain & Carbide Tipped Points)
  JUMBO HEAVY DUTY MT-5 & 6
  (Plain Point only)

Application : For Conventional Slow Speed Lathes

All Centers are sealed for entry of coolant and swarf / chips by special sealing arrangement.

Each center provided with an inspection report covering all critical parameters  like run out, correctness of Morse Taper angle etc.

Precision Ground. Maximum radial run out within 0.015mm.  Closer run outs can also be provided against request.

TRUMAX offers India's largest range of Live centers to suit specific needs.

Body made alloy steel case hardened and tempered to a hardness of 32 - 40 HRc approx.

Point made from bearing steel and hardened to 60 HRc approx. for maximum wear resistance.

Live Centers broadly confirm to IS 3793 - 1966

Ask for Catalogue 1A for Technical Specifications & Details.

HIGH SPEED CENTERS (FOR CNC)
 

Capable of withstanding very high rpm at high loads.

Suitable for CNC and other high speed turning centers.

Bearing used are of FAG GERMANY make.

Bearing lubricated for life using imported KLUBER make ISOFLEX NBU-15 Grease.

Imported German Seals used for protecting bearing from dirt and coolant.

Copy Turning centers are not recommeded and should be used only for medium speed and very low load applications.

For higher speeds than sp

Collets chucks and sleeves like turret sleeves and r8 collets.