DRILL SLEEVE
|
|
Sizes Available |
| MT 0-1, MT 1-2, | ||
| MT 1-3, 2-3 MT 1-4, 2-4, 3-4 | ||
| MT 1-5, 2-5, 3-5, 4-5 MT 1-6, 2-6, 3-6, 4-6, 5-6 | ||
| MT 4-7, 5-7, 6-7 | ||
 |
Made from 16MnCr5 (Equivalent to SAE 8620) and case hardened to 55-58 HRc |
|
As per IS 6702 – 1972 (Equivalent to DIN : 2185 - 1972 & ISO :238 - 1974) |
|
Precision Ground internally & externally |
|
Concentricity within 0.015mm |
EXTENSION SOCKET
|
|
Sizes Available |
| MT 1-1, 1-2 MT 2-1, 2-2, 2-3 | ||
| MT 3-1, 3-2, 3-3, 3-4 MT 4-1, 4-2, 4-3, 4-4, 4-5 | ||
| MT 5-1, 5-2, 5-3, 5-4, 5-5, 5-6 | ||
| MT 6-2, 6-3, 6-4, 6-5, 6-6, 6-7 | ||
|
Made from 16MnCr5 (Eqvivalent to SAE 8620) and case hardened to 55-58 HRc |
|
As per IS 6682 – 1972 (Eqvivalent to DIN : 2187 & ISO : 1080 / 1969) |
|
Precision Ground internally & externally |
|
Concentricity within 0.015mm |
Ask for Catalogue No. 4 for Technical Specifications & Details. |
TURRET SOCKET
|
|
Available in Outside Diameters of : |
| ¾", 1",1 ¼",1 ½", 1 ¾", 2", 2 1/8", 2 ¼" | ||
|
Internal Tapers available from MT-1 to MT-4 |
|
|
Made from 16MnCr5 (Equivalent to SAE 8620) and case hardened to 55-58 HRc |
|
As per IS 11949 - 1987 |
|
Precision Ground internally & externally |
|
Concentricity within 0.015mm |
LATHE SLEEVE
|
|
Available in Size : |
| MT 3-5, 4-6 | ||
|
Made from case hardened alloy steel. |
|
Precision Ground. Runout 0.015 mm max. |
|
Suitable for lathe headstock spindles |